This extendible book-like wallet is bound to keep your gift cards in order.
Printing
- All parts can be printed without supports.
- Use a brim if you have bed adhesion or curling issues.
Hardware and Additional parts
- A short length of TPU or round sewing elastic to hold the wallet together.
- Optional - 60x90mm print of your favorite book cover.
Assembly
- Print 2 covers, 1 start clip, 1 end clip, and as many middle clips as you want.
- Thread a scrap of TPU (or sewing elastic) back and forth through the spine of the wallet and pull tight.
- Glue or tie the ends of the TPU so they stay in place.
- Load up cards!
Bases
- Blank - Use for remixes or to glue on a printed cover of a favorite book.
- Filigree
- Knott
- Hexagon
- Skull
Clips
- Default - Strong hold
- Loose - Weaker hold, but sits more flat
Credit The Filligree Cover uses a free design by Takeshi Ishikawa (Brown Filigree Vintage Corner Frames ) downloaded from Vexteezy.com.
Can I sell copies of this?
Yes! This project was shared under the Creative Commons - Attribution license.
This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.
Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.
This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.