Modular Desktop Fountain - Bobblehead Adaptor

These fountain modules are compatible with many fully 3D printable bobbleheads.

https://youtu.be/dAKaOwgOqy0

Related Models

• Compatible bobbleheads
• More fountain modules

Printing

• All parts can be printed without supports.
• Plates are printed upside down to avoid overhangs.

Assemble Bobblehead Plate

• Screw a 8-10mm long M3 bolt into the bottom of the Bobblehead Plate. - Approximately 4-6mm of thread will come through the top.
• Assemble the bobblehead as normal using either the Bobblehead Plate Base or - Bobblehead Plate Base Tall. Screw bobblehead onto the Bobblehead Plate.

Assemble Bobblehead Fountain

• Place Bobblehead Fountain Top onto Bobblehead Fountain Plate.
• Secure the fountain by screwing a 8-18mm long M3 bolt through the bottom of the Bobblehead Fountain Plate.
• Set bobblehead and bobblehead spring directly in the square hole in the top of the fountain.

Can I sell copies of this?

Yes! This project was shared under the Creative Commons - Attribution license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.