This smaller version of the Lovely Puzzle Box requires no magnets and uses slide out lids.
Printing
All parts of this design can be printed with zero supports.
If your printer experienced curling, add a brim to all parts that have sharp corners.
Depending on your printer, you may need to sand the edge of the lids to get them to fit into the frames. This was not required in my test prints.
Assembly
- Attach the key to the left frame and secure with one M3 bolt that's 8-10mm long.
- Slide lids into each frame.
- Connect the two sides frames in the shape of a heart.
- Twist the frame parts to lock them into a rectangular shape.
Tips
Depending on your print, you may want to keep the key a little loose so there is flex for the two halves of the heart to snap together.
Can I sell copies of this?
Yes! This project was shared under the Creative Commons - Attribution license.
This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.
Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.
This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.