This model is restricted by licensing terms.
View license.
50 Likes68 DownloadsSeptember 29, 2023
This model is restricted by licensing terms.
View license.
Fully 3D printed Frankenstein bobblehead.
Printing
- Base and spring can be printed without supports.
- Emoji heads can be printed without supports, but you may get cleaner prints with minimal supports in spots.
- Ideal line width for the spring is 0.4mm. This will result in a perfect 2 perimeter spring.
Assembly
- Glue is not required unless the parts feel loose.
- Spring installation is easier if you print the assembly tool
Options
Springs
- Default
- Strong - Less bounce, but will last longer
Bases
- Default
- Wide - Good option if you aren't adding magnets
Customize even more!
Can I sell copies of this?
Yes! This project was shared under the Creative Commons - Attribution license.
This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.
Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.
This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.
Category:
50 Likes68 DownloadsSeptember 29, 2023
This model is restricted by licensing terms.
View license.
50 Likes68 DownloadsSeptember 29, 2023
This model is restricted by licensing terms.
View license.