A 3D printed take on the classic game Four-in-a-Row (AKA Captain's Mistress or Connect Four).
Game tokens for this model are compatible with Zaggrivation - a strategy game for up to four players.
How to Play
- Two players take turns adding a single token with their assigned color to the board.
- The first player to create an unbroken line (horizontal, vertical, or diagonal) of four or more tokens of their color wins the round.
- If the game board is filled without a line of four, the round is a draw.
- A game consists of an even number of rounds so that both players have an equal number of opportunities to play first.
Customization
Board Options
- Standard Board - More compact
- Lockable Board - Supports a sliding lock bar to store game tokens within the board.
- Storage Bin - A token storage bin that splits into two bowls for use during play.
Printing
- All parts can be printed without supports.
- Parts must print flat to work well. Add a brim if curling or bed adhesion is an issue.
- Print 42 tokens equally divided between two easily distinguished colors.
- Print two feet.
- Two perimeter walls is sufficient for the game board, but increase this if you want a stronger print.
Assembly
- Screw together all tokens. Threads should be loose enough to tighten by hand, but results will depend on filament used, print settings, and printer.
- If the threads are too tight, try adding water to the thread to lubricate it.
- If the threads are too loose, glue the token halves together.
- Connect the feet. Add glue if you wish for these to be permanently attached.
Can I sell copies of this?
Yes! This project was shared under the Creative Commons - Attribution license.
This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.
Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.
This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.
Recommended Attribution Text
"Four-in-a-Row" (https://3dprinty.xyz/project/138) is designed by 3D Printy (https://3dprinty.xyz) and shared under a Creative Commons Attribution (CC BY 4.0) license (https://creativecommons.org/licenses/by/4.0/).