A goofy device loosely based on a windshield wiper mechanism.
This model was created as a 15 second joke for a video outro.
As requested, I'm posting the files so you can print a whacky and mostly useless desk clearing mechanism of your own!
This design has not been put to rigorous use. It's a fun toy, not a serious tool.
Learn More https://youtu.be/wnYn2e8ETzQ
Printing If oriented correctly, all pieces can be printed without supports.
Use a brim if your printer has curling issues. All parts need to be reliably flat.
Required Hardware 16-18mm long M5 bolts (QTY 5) 20-24mm long M3 bolts (QTY 3)
** Optional Hardware** Add two long M5 bolts to act as clamps in the bottom of the base. Bolts will need to be longer than 10mm, but the exact length will depend on how thick your desk is.
Can I sell copies of this?
Yes! This project was shared under the Creative Commons - Attribution license.
This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.
Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.
This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.