Mini Magnetic Tile Haunted House Collection

I recently released my ‘Mega’ Magnetic Tile Haunted House Collection but have been wanting to make a playful, scaled down version - so here it is 👻 This is my ‘Mini’ Magnetic Tile Haunted House that is ¼ the scale of my original. For extra fun, many of the windows have 2-sided window panes that rotate, there's a skeleton that greets you behind a hinged front door, tombstones to decorate the front yard and all the spiders, cats, rats, ghosts and skeletons you can handle 🕷🎃🐈‍⬛🐀👻 (These tiles are compatible with store bought magnetic tiles just fyi:)

3D Print Settings PLA Filament Layer height 0.2mm (for some of the more detailed pieces - like the rat windows and tombstones you can use a 0.16 layer height if preferred) Infill 15% Brim may be needed on larger pieces (like the 150x75 walls) if you notice any warping

****Neodymium magnets needed: 20x5x2 ****

• I specifically designed all these pieces to work with this size magnet

• Here is a link to these magnets on Amazon: https://amzn.to/3Nibhd3

• Magnetic build plate highly recommended but not absolutely necessary.

Printing Instructions for Inserting Magnets and Filament Pieces:

• Every piece in this collection (except for the Porch Pillars and the Chimney Cap) need to be paused at layer 30 (layer height 4.8mm) to insert magnets.

• The Front Door piece and all the window panes that rotate also need cut pieces of filament placed in the ‘filament chamber’ areas (see photos and video).

• It helps to straighten the filament pieces that will be inserted into these pieces. I have designed a separate 3D printed device to do that (I call it the ‘filament straightening block’) and will link a video below.

• After the magnets/filament are inserted, resume printing

I have also included a 3mf print profile with the following print plates: Print Plate #1 Mini HH_75X75_Front Door: 4 colors, pause at layer 30, cut and insert filament pieces to fit into filament chamber areas Print Plate #2 Mini HH_75x75_Curved Cat & Ghost Window: 4 colors, pause at layer 30; cut and insert filament pieces to fit into filament chamber areas Print Plate #3 Mini HH_75x75_Curved Spider & Ghost Window: 4 colors, pause at layer 30; cut and insert filament pieces to fit into filament chamber areas Print Plate #4 Mini HH_75x75_Curved (Plain) Window: 3 colors, pause at layer 30 Print Plate #5 Mini HH_75x75_Rectangle Spider & Ghost Window: 4 colors, pause at layer 30; cut and insert filament pieces to fit into filament chamber areas Print Plate #6 Mini HH_75x75_Rectangle Pumpkin & Ghost Window: 5 colors!!, pause at layer 30. Cut and insert filament pieces to fit into filament chamber areas. This is the only piece with 5 colors. You will notice I colorized both the ghost and the pumpkin white. After the white is done printing the ghost you will need to change out the white filament for orange before it starts printing the pumpkin. Pause the print if needed to do this (on my Bambu printer I can do this while printing). Print Plate #7 Mini HH_75x75_Rectangle (Plain) Window: 3 colors, pause at layer 30 Print Plate #8 Mini HH_75x37.5_Curved (Plain) Window: 3 colors, pause at layer 30 Print Plate #9 Mini HH_75x37.5_Curved Rat Window:3 colors, pause at layer 30; cut and insert filament pieces to fit into filament chamber areas Print Plate #10 Mini HH_75x37.5_Plain Wall Panel: 1 color, pause at layer 30 Print Plate #11 Mini HH_150x75_Curved Skeleton & Ghost Window: 4 colors, pause at layer 30; cut and insert filament pieces to fit into filament chamber areas Print Plate #12 Mini HH_150x75_Curved (Plain) Window: 3 colors, pause at layer 30 Print Plate #13 Mini HH_150x75_Tree Wall: 2 colors, pause at layer 30 Print Plate #14 Mini HH_75x75_Floor Piece: 1 color, pause at layer 30 Print Plate #15 Mini HH_75x37.5_Floor Piece: 1 color, pause at layer 30 Print Plate #16a Mini HH Front Porch: 1 color, pause at layer 30 Print Plate #16b Mini HH Porch Pillars: 1 color, pause at layer 30 Print Plate #17a Mini HH Tombstone Noah&RIP: 2 colors, pause at layer 30 Print Plate #17b Mini HH Tombstone Ben&Waldo: 2 colors, pause at layer 30 Print Plate #18 Mini HH Front Door Awning: 1 color, pause at layer 30 Print Plate #19 Mini HH_75x85_roof: 1 color, pause at layer 30 Print Plate #20 Mini HH_90x85_roof (no chimney): 1 color, pause at layer 30 Print Plate #21a Mini HH_90x85_roof with chimney: 1 color, pause at layer 30 Print Plate #21b Mini HH Chimney Cap: 1 color, pause at layer 30

Have fun printing!