A set of adapter boards for upgrading Anycubic 4MAX PRO electronics on LERDGE Z:
for the control board; for the module to increase the heating power of the hotbed; for the power management module; >>>> !!! unaccounted errors have been corrected !!! for display module (DONE) for fan plug and Z-axis optical sensor.
Print Settings Rafts: No Supports: No Resolution: 0.3...0.35 Infill: 20% Filament material: PLA
Notes: The calculation of the shrinkage of the landing dimensions for printing PLA is made. Threaded holes do not need additional processing with a tap. Before installing Module 2, it is better to use a thin 2-sided adhesive tape. Before installing the motherboard, it is necessary to make a small cut in the slots of the USB printer frame and in the side cover. Install the mother on the adapter, then into the printer case. The adapter for display module print with a resolution of 0.15...0.2 mm.