Hey folks!

This is Santa's Last Delivery and the model is quite versatile!

• There are 4 chimney types - 2 Heights and one with or without a fireplace.
• Printing one without a fireplace makes it essentially a box!
• The Santa skeleton is optional.
• Fireplace + TealightHolder are optional as well
• 2 Types of shoes
• 2 Santas - regular and middle finger.
• You can place a tealight inside the fireplace.

Printing:

• The fireplace chimney requires some supports under the arc - do NOT add any additional supports. Color the top part either with AMS (no purge tower) or by switching filaments mid print
• The snow requires supports - use organic/tree supports where required.
• Legs, no supports. Color the legs part either with AMS (no purge tower) or by switching filaments mid print.
• Shoes you have simple and buckle versions, Color top part either with AMS or by switching filaments mid print.
• Santa's - Supports are not mandatory.
• Fireplace - Color either with AMS or by switching filaments mid print.

Assembly:

• Glue shoes to legs positioned as seen in photos.
• Glue Santa to middle of the bottom of the snow part, I did not do any fancy connectors as this is optional so if you don't want the skeleton you will have a clean bottom.
• Glue tealight to fireplace as seen in photos (optional part)
• Legs go inside the snow, you can but don't have to use glue.