There are several variations of those ghosts out there but I wanted a design that is a Box, a decoration and also has those cute sticking eyeballs 👀
The download includes both regular and dead ghost versions.
Print the bottom part without supports, Print the top part with very thin supports - Make sure they are easily removed. You can probably make it without but I did mine with for the eyes section.
Print both eyes and 2 Pupils.
Push the eyes from above into the socket (Use some force) The eyes snap inside the sockets and they may hold without glue but probably not for long so put a drop in there. The smaller you print the less likely the snapping will work.
Reduce pupil size by 1% if you have issues pushing them in
Test printed in 70%,80%,100%
Use 3 Walls to reduce signs of infill 10%-20% infill Use supports for the top part to support the top of the eyes section.