3DGeex2.3K followers

Collapsing Morgenstern

Name: Collapsing Morgenstern
Brand: 3DGeex
SKU: 1108052
Price: 3 USD
Availability: InStock
Rating: 5 (10 reviews)

29 downloads · 2 years ago · Hey folks! So this is actually quite an old model, I started working on this almost a year ago a bu

Subscribe for access starting at $8 USD

Get access to this model and 218+ more

One-time purchase for $3 USD

Description

Hey folks!

So this is actually quite an old model, I started working on this almost a year ago a but didn't publish it and since then others already thought about a similar idea 🥲

Anyway a week or so ago I noticed it, did some updates and decided to release it! I changed the spikes from the initial model because they were too sharp and came out wiggly. Even though they are not sharp - PLEASE BE CAREFUL. Printing this one big can really throw a punch so do be careful... Also you will not be able to swing this like crazy - the handle is not very strong.

Printing:

Printing this one should be rather easy as the walls are relatively far away from each other, but make sure your printer is tuned and you can use all the tips I provided for the collapsing middle finger.

Supports are not required but can be good for the lower screw holes only.

Print 17 spikes which screw into the sphere - I printed 5 long ones for the top and sides

Please don't hit anyone with this 🫠