A dragon egg that can open and close by a screw thread and in which you can put something in. Printing at 100% the egg is 78mm wide and 100 mm tall. The little egg you see in the pictures is at 50% and don't recommend to go that low. I printed it both sides with the threaded side on the bed using supports. Also i used a 0.4mm nozzle and 0.16mm layer height but 0.2 will be good to. Do you like to sell the prints than join my membership plan. #FunctionalArt
Categories:
61 Likes60 DownloadsJuly 16, 2023