Pine Crystal Lamp (Rechargeable Puck Light Version)

This is the Pine Crystal Lamp. It is a desktop lamp what uses a rechargeable puck light.

This model includes different version for desired printing types.

1. Full Vase Mode:

Use file "Pine Crystal Rechargeable Lamp Full Vase Mode 0.4mm Nozzle.3mf" or "Pine Crystal Rechargeable Lamp Full Vase Mode" STL/STEP.

3MF (Orca/Bambu Slicer) File has all the setting set up. Just slice and print

If using the models in other slicer make sure you have these important settings: Vase Mode/ Spiral Mode: Enabled First Layer Height: 0.3mm Layer Height: 0.2mm Outer Wall width: 0.6mm Bottom Layer Count: 100 Slower wall speed between 80-150mm/s for best results

2. Base + Lamp Cover Vase Mode: Use files: "Pine Crystal Rechargable Base" + "Pine Crystal Rechargable Cover" STL/STEP

"Pine Crystal Rechargable Base" File prints with normal print settings

"Pine Crystal Rechargable Cover" File prints in vase mode with the same settings as above but "Bottom Layer Count: 0"

I also included a "Pine Crystal Rechargeable Cover Shelled" which is the cover already at 0.6m thickness to print in normal mode.

Installation for the 2 Part Model: Put the base into the crystal cover and Pop it into place.

Rechargeable Light are: GOODEA.fun 1200mAh Under Cabinet Lights Rechargeable Puck Lights (https://amzn.to/4foH1sU)

Commercial Licensing available through my Thangs Memberships, starting at $10/mo

Use Promo code WELCOME50 for 50% off your first 2 months!