tracking pixel
3D M

Pine Crystal Lamp (Rechargeable Puck Light Version)

by
3D Mieks
Follow
Follow
Remix Model
3D Mieks
3D Mieks
|
Image 2 of 2
Pine Crystal Lamp (Rechargeable Puck Light Version) 3d model
3D Mieks
3D Mieks
|
Image 2 of 2
Pine Crystal Lamp (Rechargeable Puck Light Version) 3d model
2D
3D
Makes
Pine Crystal Lamp (Rechargeable Puck Light Version) 3d model
Pine Crystal Lamp (Rechargeable Puck Light Version) 3d model

This is the Pine Crystal Lamp. It is a desktop lamp what uses a rechargeable puck light.

This model includes different version for desired printing types.

1. Full Vase Mode:

Use file "Pine Crystal Rechargeable Lamp Full Vase Mode 0.4mm Nozzle.3mf" or "Pine Crystal Rechargeable Lamp Full Vase Mode" STL/STEP.

3MF (Orca/Bambu Slicer) File has all the setting set up. Just slice and print

If using the models in other slicer make sure you have these important settings: Vase Mode/ Spiral Mode: Enabled First Layer Height: 0.3mm Layer Height: 0.2mm Outer Wall width: 0.6mm Bottom Layer Count: 100 Slower wall speed between 80-150mm/s for best results

2. Base + Lamp Cover Vase Mode: Use files: "Pine Crystal Rechargable Base" + "Pine Crystal Rechargable Cover" STL/STEP

"Pine Crystal Rechargable Base" File prints with normal print settings

"Pine Crystal Rechargable Cover" File prints in vase mode with the same settings as above but "Bottom Layer Count: 0"

I also included a "Pine Crystal Rechargeable Cover Shelled" which is the cover already at 0.6m thickness to print in normal mode.

Installation for the 2 Part Model: Put the base into the crystal cover and Pop it into place.

Rechargeable Light are: GOODEA.fun 1200mAh Under Cabinet Lights Rechargeable Puck Lights (https://amzn.to/4foH1sU)

Commercial Licensing available through my Thangs Memberships, starting at $10/mo

Use Promo code WELCOME50 for 50% off your first 2 months!


2 Likes6 DownloadsNovember 1, 2024


2 Likes6 DownloadsNovember 1, 2024