Warren the Warthog is a 233 x 233mm print, using 7 different colours.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA Overture Cement Gray Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA Overture Light Gray Transmission Distance: 0.7 PLA+ Esun Bone White Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Charcoal Black At layer #14 (1.2mm) swap to Cement Gray At layer #19 (1.6mm) swap to Grey At layer #23 (1.92mm) swap to Light Gray At layer #28 (2.32mm) swap to Bone White At layer #40 (3.28mm) swap to Jade White for the rest.
Frame not included.