Lion King of the Jungle.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. The Model is 233x233mm in size. You can print at higher layer heights below the Min Depth of 0.48mm. The Max Depth is 4.2mm and the Actual Depth is 4.3mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA Overture Cement Gray Transmission Distance: 0.6 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Matte Latte Brown Transmission Distance: 2 PLA BambuLab Basic Beige Transmission Distance: 8 PLA+ Esun Bone White Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 8 unique filaments
Swap Instructions: Start with Black At layer #15 (1.28mm) swap to Cement Gray At layer #24 (2mm) swap to Orange At layer #27 (2.24mm) swap to Brown At layer #28 (2.32mm) swap to Latte Brown At layer #34 (2.8mm) swap to Beige At layer #38 (3.12mm) swap to Bone White At layer #42 (3.44mm) swap to Jade White for the rest.
Frame not included.