This is my new favourite. 13 colours and swaps but the end result is fabulous. The photos look great but they don't do the actual print justice.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. The Model is 233x233mm in size. The Depth is 5mm. This print uses 13 unique filaments.
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Green Transmission Distance: 2 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA Overture Cement Gray Transmission Distance: 0.6 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA+ Sunlu Grey Transmission Distance: 2 PLA Overture Matte Light Gray Transmission Distance: 0.3 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Matte Latte Brown Transmission Distance: 2 PLA+ Esun Bone White Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions: Start with Black At layer #18 (1.52mm) swap to Green At layer #20 (1.68mm) swap to Charcoal Black At layer #22 (1.84mm) swap to Blue At layer #23 (1.92mm) swap to Green At layer #24 (2mm) swap to Cement Gray At layer #27 (2.24mm) swap to Brown At layer #30 (2.48mm) swap to Yellow At layer #31 (2.56mm) swap to Grey At layer #35 (2.88mm) swap to Light Gray At layer #40 (3.28mm) swap to Orange At layer #42 (3.44mm) swap to Latte Brown At layer #45 (3.68mm) swap to Bone White At layer #52 (4.24mm) swap to Jade White for the rest.
Frame not included.