#TidyDesk - This extremely elegant and multifunctional monitor stand 😜 not only creates better viewing angles for doing things like (learning fusion 360 with Product Design Online) 😏 and posting thangs on (thangs.com) 😉. But… It also works as a compact smart assistant stand directed to the listener so that you can work more efficiently, along with having a built in cubby to keep your desk neat and tidy 😁. But wait there's more, this stand also has cable management built in via a small groove in the back so that it can stand flush with the wall 👀. In terms of making the physical object, this is enhanced for printing because the top and bottom can be printed separately and joined together with pegs 👍. This allows it to be printed with no support material and if you want your monitor stand to be taller you can print a taller bottom piece, making this design environmentally and cost conscious because of the reduced material use 👌. I went through a few iterations with this project, some of them include size/ tolerance changes, adding the groove in the back for cable management and adding a fillet to the cubby because the plastic was pretty sharp 🛠️. Aesthetically, I designed the stand to join the monitor and assistants together by combining their design language 😍. Thanks for this great opportunity and good luck to everyone participating. If you would like to see some fancy renders here they are: file:///C:/Users/tobia/Downloads/tidydesk%20-%20Google%20Docs.pdf