Bambu Studio / Orca Slicer settings:

Global, Taka_1, Taka_3:

• layer height: 0.2mm
• line width sparse infill: 0.6mm
• line width walls: 0.5mm
• wall loops: 0
• top shell layers: 0
• bottom shell layers: 0
• infill density: 62%
• infill pattern: Grid
• infill anchor: 1000 (unlimited)
• max infill anchor: 1000 (unlimited)
• infill direction: 45
• infill/wall overlap: 90%
• detect narrow internal solid infill: no
• speed sparse infill: 18 mm/s
• reduce infill retraction: no
• enable support: no
• brim: outer and inner, gap 0mm

Taka_2:

• walls: 12
• object flow ratio: 1.2

Taka_4:

• line width sparse infill: 0.4mm - infill density: 25%
• infill pattern: rectilinear
• infill direction: 0

Taka_5:

• line width sparse infill: 0.4mm - infill density: 25%

Taka_6:

• object flow ratio: 1.2 - infill density: 100%
• infill pattern: rectilinear
• infill direction: 0

Taka_7:

- infill density: 99%

• infill direction: 0

Taka_8:

• line width sparse infill: 0.3mm
• object flow ratio: 2 - infill density: 80%
• infill pattern: triangles

Taka_9:

• walls: 12

Filament:

• Retraction: 1.8mm
• Wipe: no
• Z hop: 1.2mm, Normal type
• Max volumetric speed: 2.5 mm^3/s 
• Temperature: 215 C - 225 C

Website: https://www.riverfamily.art/