Original idea and concept thought of by myself (Tuban 3D)

This is the second installment of this line. With different weapons

Even though there is only 3 models you can easily swap the guns and close quarters weapons around and have many different combinations of the them.

History of the Bean Cans https://docs.google.com/document/d/1nx4eyZPa0pQNFdXvti8qKOJPm5fucgLgyQ5boxrrx-0/edit?tab=t.0

The file is a 3mf file with my print settings on. I used 0.1 layer height. I would recommend either printing the back pack protector separately. or with a brim or with plenty of glue stick

To print these minis (6 in total) took about 20 hours and 120grams of filament. Polymax pla. The tracks have the most support to remove as I have not got bed only supports there is a slot that will need support for the rest to sit on while printing. I expect a lot of people who build warhammer or other table top minis to easily put them together. For reference I have not glued the beam arms in so they can all swap arms. I have also not glued the can to the tracks as it means I can change the look of them easily.

If you have any questions or problems with the printing or the model, or want to show of your minis you can let me know via my discord here https://discord.gg/hXc5K8AzK2