This file is free for personal use only.

If you would like access to sell these, you can do that by signing up for a commercial membership.

This publication includes two types; a star and a heart shaped wand. Both require a small amount of assembly.

Each wand has small tabs that need to be inserted into the printed star or heart shape (only on one of the 2) and then glued in place. We also use glue on the flat side of the heart or star before assembly of the two pieces using Loctite super glue.

The handles for the wands are slightly different in design. Each handle is made to securely hold your card in place so it won’t slide out during use. When you want to remove the card, simply detach the handle and slide the card out.

Included is also 3mf files with the files ready to print with supports.

Important when downloading/buying the design:

This design (as all Sassiecat3D designs) is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially.

The Digital files are never to be re-sold, shared, or given away!

If you would like to legally sell the printed files commercially, please join our Tribe, Thangs or our Patreon and subscribe to the Commercial Tier.

https://www.patreon.com/c/Sassiecat3d

https://thangs.com/designer/sassiecat3d

https://www.myminifactory.com/users/Sassiecat3d#/

3D PRINTING SETTINGS: I used a .4mm nozzle, .2mm layer height, I use 5-10% infill. Make sure your printer is all set with a good calibration and retraction before printing it