Tap to pay Wands (Commercial Use) 3d model

Tap to pay Wands (Commercial Use)

4 downloads · 2 months ago · This publication includes two types; a star and a heart shaped wand. Both require a small amount of

This model is restricted by licensing terms.

View license.

Description

This publication includes two types; a star and a heart shaped wand. Both require a small amount of assembly.

Each wand has small tabs that need to be inserted into the printed star or heart shape (only on one of the 2) and then glued in place. We also use glue on the flat side of the heart or star before assembly of the two pieces using Loctite super glue.

The handles for the wands are slightly different in design. Each handle is made to securely hold your card in place so it won’t slide out during use. When you want to remove the card, simply detach the handle and slide the card out.

Included is also 3mf files with the files ready to print with supports.

Commercial Tier Membership rules apply to this file

3D PRINTING SETTINGS: I used a .4mm nozzle, .2mm layer height, I use 5-10% infill. Make sure your printer is all set with a good calibration and retraction before printing it.