I've had this idea floating around in my head for a while a cute little Highland Spidercow model.

I finally brought it to life just the way I imagined, and this is the result!

Once the Spidercow was done, I felt it needed an equally adorable home, so I created a cozy cavebarn for it to live in.

It prints well even at 60% scale.

Commercial Tier Membership rules apply to this file

3D PRINTING SETTINGS: I used a .4mm nozzle, .2mm layer height, I use 5% infill. Make sure your printer is all set with a good calibration and retraction before printing it.