This is the newest edition to the Hatchlings series!

This goose comes in 2 different versions, one is a normal hatchlings version, the other is a special edition where there are 3 different hats you can print and decorate the goose with.

There is the Tophat, Cowboy hat, and a bow.

We recommend using supports for the bow, and a brim.

This model is testprinted down to 60% size.

Important when downloading/buying the design:

This design (as all Sassiecat3D designs) is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially.

The Digital files are never to be re-sold, shared, or given away!

If you would like to legally sell the printed files commercially, please join our Tribe, Thangs or our Patreon and subscribe to the Commercial Tier.

https://www.patreon.com/c/Sassiecat3d

https://thangs.com/designer/sassiecat3d

https://www.myminifactory.com/users/Sassiecat3d#/

3D PRINTING SETTINGS: I used a .4mm nozzle, .2mm layer height, I use 5-10% infill. Make sure your printer is all set with a good calibration and retraction before printing it