This is the newest edition to the Hatchlings series!

This goose comes in 2 different versions, one is a normal hatchlings version, the other is a special edition where there are 3 different hats you can print and decorate the goose with.

There is the Tophat, Cowboy hat, and a bow.

We recommend using supports for the bow, and a brim.

This model is testprinted down to 60% size.

Commercial Tier Membership rules apply to this file

3D PRINTING SETTINGS: I used a .4mm nozzle, .2mm layer height, I use 5-10% infill. Make sure your printer is all set with a good calibration and retraction before printing it