.png&w=256&q=75)
super mushroom container (no threads)
139 downloads · 4 years ago · a new version of the super mushroom [container](https://thangs.com/designer/pressprint/3d-model/supe
a new version of the super mushroom container, but with no threads.
printing settings scaling: at least 100% nozzle: 0,4 layer height: 0.2 wall line count: 2 infill: 10% support: no
this model is licensed under_ theCreative Commons - Attribution - Non-Commercial - Share Alikelicense._
happy printing
super mushroom container (no threads)
139 downloads · 4 years ago in
skyline wallart
.png&w=3840&q=75)
Mario Cactus Container - Single Color
.png&w=3840&q=75)
AMG Break Lamp
.png&w=3840&q=75)
Penguin Frame - But Why ?
Personalized Real Madrid Jersey Frame – Kylian Mbappé Edition
Personalized Barça Jersey Frame – Lionel Messi Edition
Squirtle Egg - MultiColor
Gengar Egg - MultiColor
.png&w=3840&q=75)
Duck Switch Holder - Single Color
.png&w=3840&q=75)
Customized Balance Piggy Bank
Azumarill Hinged Pokeball - Multipart
Arcitectual lamp
.png&w=3840&q=75)
Meowth Controller Holder - Single Color
.png&w=3840&q=75)
Pikachu Egg Holder - Multipart
Charmander Egg - Multipart
NFC Keychains
.png&w=3840&q=75)
Flareon Controler Holder
.png&w=3840&q=75)
Sponge Bob Tray - Single Color
Rock Vase
The top doesn't fit the bottom. Opening is same size.
I'm so sorry to hear this, but it's not the same size I applied 0.3mm clearance to the top part, it must be from your printer. but I updated the file for you the top now has a 0.5mm clearance it should work well for you now. thank you for your feedback and sorry again :)