.png&w=256&q=75)
pikaball container
293 downloads · 4 years ago · a threaded pikaball container, easy to print.
**printing settings**
scaling: at least 100%
orient
a threaded pikaball container, easy to print.
printing settings scaling: at least 100% orientation: just drag the model and slice as it is nozzle: 0,4 layer height: 0.2 wall line count: 2 infill: 10% support: just for the inside bottom part and the red parts
this model is licensed under_ theCreative Commons - Attribution - Non-Commercial - Share Alikelicense._
happy printing
pikaball container
293 downloads · 4 years ago in and
skyline wallart
.png&w=3840&q=75)
Mario Cactus Container - Single Color
.png&w=3840&q=75)
AMG Break Lamp
.png&w=3840&q=75)
Penguin Frame - But Why ?
Personalized Real Madrid Jersey Frame – Kylian Mbappé Edition
Personalized Barça Jersey Frame – Lionel Messi Edition
Squirtle Egg - MultiColor
Gengar Egg - MultiColor
.png&w=3840&q=75)
Duck Switch Holder - Single Color
.png&w=3840&q=75)
Customized Balance Piggy Bank
Azumarill Hinged Pokeball - Multipart
Arcitectual lamp
.png&w=3840&q=75)
Meowth Controller Holder - Single Color
.png&w=3840&q=75)
Pikachu Egg Holder - Multipart
Charmander Egg - Multipart
NFC Keychains
.png&w=3840&q=75)
Flareon Controler Holder
.png&w=3840&q=75)
Sponge Bob Tray - Single Color
Rock Vase
I don't get why the width of the wall is changing. It adds a liner on the white and yellow half sphere an extra line which is impossible to get rid off. Tried slow down the speed and add smoothness....
I hope that not other design are designed with walls like this.