This design was made with you in mind :)

These rattan/rope wall hooks are a super cool way to spice up your entry way or your bathroom. My wife and I didn't have any towel hooks in our bathroom so that is why I designed them :) This model is printed in PLA with a dense infill and are very sturdy; they print as a single part too! Watching patterns like this one print layer by layer is definitely a sight to see!
Become a member and download the .stl and the preconfigured .3mf Bambu Studio File by selecting “Download All > Original”

Note: If you are interested in a commercial license to sell prints of my designs, you must obtain the license by signing up for my Entrepreneur membership tier!
Model Assembly Pretty simple for this one — print the model using an AMS, thread the threaded inserts into the print, mount your studs into the studs ;), and load with your coats, towels, or whatever! Watch the associated reel showing the assembly on my instagram page @mcinventiveproductions!
Materials eSun PLA (Light Khaki) : https://amzn.to/4dnIVJN Bambu Lab Matte Tan : https://us.store.bambulab.com M8x50mm Hanger Bolts / M8x20mm Threaded Inserts : https://www.amazon.com/dp/B0CW1J9CP6?ref=fed_asin_title&th=1
Print settings Material — PLA Print orientation — shown in images! Nozzle size: 0.4 mm Layer Height: 0.2 mm Standard Infill: 80% Bed Size: Minimum 150x150mm
P.S. The links in this description may be affiliate links which allow me to benefit financially from your purchase at no extra cost to you!