3D MODEL DESCRIPTION Continuation of previous collection RIBONE. This time it is a play with twisting the elements to build a similar volume.

Design can be printed in any colour or size and has a wide variety of possibilities thanks to additive technologies.

Lamp shades are specially designed to be printed using an FDM 3D printer. While designing these shades I have taken into account the technology and way how the object is printed. Trying to avoid any support material and use as little material as possible to build a firm structure but also big enough in a short print time.

Shade is designed to work with IKEA cord set HEMMA or SONNEBY: https://www.ikea.com/gb/en/p/hemma-cord-set-white-10386577/ or https://www.ikea.com/gb/en/p/sunneby-cord-set-black-textile-90420129/

3D PRINTING SETTINGS It is easy to print, and it requires no support.

THE BEST SETUP SO FAR IS: 0.3mm layer height 0.55 mm line width

Fancy to print & sell this design commercially? You can subscribe to my commercial catalogue at: https://designs.cubee3d.com/martin-zampach-lampshades