lusprints997 followers

Minimalist Xbox Series X/S controller holder 🟢 3d model

Minimalist Xbox Series X/S controller holder 🟢

64 downloads · 2 years ago · Another clean and simple holder joins the family, this time for Xbox controllers! 🟢 Just like the

This model is restricted by licensing terms.

View license.

Description

Another clean and simple holder joins the family, this time for Xbox controllers! 🟢

Just like the ps5 controller stand, this one also has a customizable ring with different colors, depending on what color your controller is or what color suits your interior.

The base is printed in place. You insert the ring and close the two parts and it's ready. You don't need to use glue if you want to replace the inner ring with a different color in the future.

I also added a version with small logo if you want to highlight which controller this stand is for.

As always you will find additional photos in the attachment.

Happy printing!! ✨

3D PRINTING SETTINGS

Make sure your printer is calibrated and the heating bed is leveld for best results!

-Layer Height: 0.2 -Supports: NO -Infill: 10% (cross hatch In this case)

Tags:

Discussions

kailanchristian5 months ago

Is the gap between ring and top cover of 2mm desired.

brainbox110010 months ago

Maybe this is too minimalist. You put the controller in and it just falls over. The controllers tend to be top heavy. Deeper holes or printing with TPU or some other grippy material may help.

lusprints10 months ago

Hi! Thank you for your feedback 🙏 I added a taller version, so the controller sits deeper and doesn’t fall out as easily :)