Ventilated cable management – Organized power, without the mess.

Cable clutter is one of the fastest ways to make a workspace feel chaotic. Logical CableNest was designed to contain power adapters and cables in a clean, breathable, and portable way.

CableNest A is the smallest size in the CableNest lineup and is offered as a free starter size. It’s ideal for compact laptop setups, single-monitor desks, or anyone wanting to try the CableNest system before scaling up.

CableNest is a ventilated cable management box that contains power adapters and excess cable length while keeping everything organized, cool, and easy to move.

Open hex-pattern walls allow heat to escape, while the enclosed form keeps cable clutter visually contained and out of the way.

Power adapters load through the hinged split top, cables route out either end, and the ventilated walls allow heat to escape during use.
Once closed, everything stays organized and accessible without unplugging anything.

Because all cables and adapters are contained in a single unit, the entire setup can be picked up and moved as one.

CableNest can be used entirely on its own or paired with the optional Logical DeskBox, which is designed to sit securely on top of a matching-width CableNest.

The DeskBox adds organized storage for tools and desk accessories, while CableNest handles power and cables. Each component can also be used independently.

CableNest A is the smallest available width in the system and is offered as a free starter size.

All CableNest models share the same:

• Height: 100 mm
• Depth: 160 mm

Available widths (small → large):

• A – Small (this model, free starter size)
  Width: 224 mm
  Print bed required: 216 mm
  Mates with DeskBox A

• B – Medium
  Width: 256 mm
  Print bed required: 248 mm
  Mates with DeskBox B

• C – Large
  Width: 288 mm
  Print bed required: 280 mm
  Mates with DeskBox C

• D – Extra Large
  Width: 320 mm
  Print bed required: 312 mm
  Mates with DeskBox D

Each width has a corresponding DeskBox designed to match it.

Note: Images may show a representative size. Dimensions vary by model.

• 100% 3D printable
• Snap-together design
• No hardware required
• Assembly is identical across all sizes

Clear assembly, disassembly, and usage diagrams are included.

CableNest was designed for people who want a clean workspace without committing to a permanent desk setup.

By containing power and cables in a ventilated, movable box, CableNest keeps workspaces tidy while remaining flexible and easy to pack away when needed.

DeskBox A https://than.gs/m/1505434

DeskBox B https://than.gs/m/1505433

DeskBox C https://than.gs/m/1505432

DeskBox D https://than.gs/m/1505431

CableNest B https://than.gs/m/1505282

CableNest C https://than.gs/m/1505280

CableNest D https://than.gs/m/1505276

Join the LogicalPlanet Discord https://linktr.ee/logicalplanet

Visit my blog for more details and other designs https://www.logicalplanet.com/

Revisions and Updates
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model. Please email me at logicalplanet3d@gmail.com if you would like me to make a revision or have comments about this design.