EyeWear Stands - Snap-together and scalable
467 downloads · 2 years ago · This is a two-part eyewear stand you can snap together to form a chain of eyeglasses holders. Use j
This model is restricted by licensing terms.
View license.
This is a two-part eyewear stand you can snap together to form a chain of eyeglasses holders. Use just one or connect an unlimited number of them to hold all your glasses and sunglasses.
- 100% 3D Printed: No hardware, fasteners, or adhesives required.
Print Settings For the best results, use these settings:
- Material: PLA or PETG (other materials may also work)
- Nozzle: 0.4mm
- Layer Height: 0.2mm
- Line Width: 0.4mm
- Wall Count: 4 (1.6mm)
- Top and Bottom Layer Count: 5
- Infill: 40% (Cubic)
- Brim: No
- Support: No
2025-01-04 Update: The Upright component has been revised. A small chamfer has been added to the underside (bed side) to improve fit into the Base.
2025-01-23 Update: I have added STL format versions of the file.
Additional Info Visit my blog for more details and other exciting designs: https://www.logicalplanet.com/
EyeWear Stands - Snap-together and scalable
467 downloads · 2 years ago in and
This model is restricted by licensing terms.
View license.
Not so… XL Nutcracker, for smaller build plates
broken brick Zelda
.jpg&w=3840&q=75)
SkinFig Wolverine
XL Nutcracker for larger build plates
SNES Console Switch Game Stand
Knitting Counter - Commercial Version
HookForm Modular Rotating Hook Display System – Customizable Wall-Mount Rack for Collectibles & Desk
Allay
Moduluma - Orbiflora Lampshade Add-On
School Bus Marker Holder (Free Standing)
Easy Print Photo Frame Kumo for 50x70mm Images
Batman Phone Holder V2
Moduluma - Florahedron Lampshade Add-On
Puzzle tea light holder
Gas tank inspired portable storage boxes
Autobots Keychain - Transformers
SYZYGY | Heart Vase, scalable
3DL T-Rex
.png&w=3840&q=75)
Articulated Skeletal Basilosaurus
Hi there! New to printing and love your models! This will be one of the first things I print. I just downloaded the file and I have Crealty and an Ender printer. I can't get the 3mf file to load in my slicer, do I need to convert it to STL?
Hi Matt, I have added the STL version of the files to the download now. Hopefully that helps. I will also look into the slicer issue as well. I will leave another message here for you about that shortly. If you have any questions or other issues I can help you with please email me at pdb6251 gmail.com.
Matt, I checked the original 3MF files across many slicers, and I can see in some cases (Cura-based slicers, including Creality Slicer), the Base is awkwardly loaded just below the build plate. The STL version does load better. So I am wondering if that was the issue you were having? Thanks for bringing it to my attention, I will try to address that earlier in future postings.
Thank you. You should not need to but I can upload stl files for you. I will do that in about 12 hours from now.