This ghost is pretty ingenious. It's arms stay raised in a haunting pose and when pulled down they spring back up.

Look at the pictures to see how this works, you will need a small elastic/rubber band to make the mechanism work.

Printing: Supports are essential and they need to be good if you don't want to spend ages cleaning the print.

Assembly: This takes some patience but is definitely rewarding. First, assemble the pivoting arms and elastic band with the rear part of the body. You can hold the arms in place by holding them with one hand (see image) and with the pegs installed, you can introduce the front of the model. The pegs are enough to click into place temporarily but I would recommend glue if you want it to stay together.

Enjoy building and don't forget to upload your make here and tag me on Instagram or Tiktok.