This is a base textile to use with either negative parts, or as panels to sew together for a larger piece. You're only limited by your imagination!

There are two different 3mf files, the first is for build plates of 256x256 and smaller. The second is for 300x300 build plates. If you have larger build plates, you can download the corresponding STL file and add your own settings per the attached printing on fabric guide.

I have these set to .72mm thick, or 3 layers at .24mm (the most common thickness of fabric that i've worked with). If you are experiencing snagging, verify that your layer height is greater than the thickness of the fabric. A pause command has to be entered in between the first and last layer in order to place the fabric. Check out the attached PDF for more info.

Try this negative part file for a twist! Follow the instruction guide associated with the modifiers. https://than.gs/m/1262146

The hat was made with the negative hat modifier found here - https://than.gs/m/1321314

If you have any questions, send me an email at Kaizen3DPrints@gmail.com