jankmart2.2K followers

Ergonomic Switch Grip

729 downloads · 2 years ago · **Now with two piece handles for smaller printers like Bambu A1 and Prusa Mini!** Hands down the be

This model is restricted by licensing terms.

View license.

Description

Now with two piece handles for smaller printers like Bambu A1 and Prusa Mini!

Hands down the best Nintendo Switch Grip you can print. Print it in whatever filament you want. Reprint if you chose TPU, that was a bad idea. I love you.

Tags:

Community Makes (2)

I don't think the second backplate is needed unless you handle it recklessly. So I think if you redesign it a bit and add a stop/hook where I marked with red it would be all one piece and just as good.

Printed in abs using preset options. Not sure if brim option was not included or somehow removed, but first print (no brim) the larger part came free halfway though, added 0.6mm brim, not enough, knocked loose again. Was successful 3rd time with 10mm brim and 0mm spacing.

Community Makes (2)

Discussions

josh.boyko2 years ago

Printed in abs using preset options. Not sure if brim option was not included or somehow removed, but first print (no brim) the larger part came free halfway though, added 0.6mm brim, not enough, knocked loose again. Was successful 3rd time with 10mm brim and 0mm spacing.

jankmart2 years ago

Nice Print!!

hopliteheliotes2 years ago

I have had a few failures on this thing printing in default orientation. I normally dont have issues. May need very heavy supports.

ek'o2 years ago

I don't think the second backplate is needed unless you handle it recklessly. So I think if you redesign it a bit and add a stop/hook where I marked with red it would be all one piece and just as good.

wpaulmayo2 years ago

I got this model printed, but had about three failures on the handle model. The Brim helped 80% of the way then it looks like the weight of the handles applies enough force over time to release it from the bed.