Trelix, desk pot planter. video thumbnail

Trelix, desk pot planter.

447 downloads · 2 years ago · Designed by us, 3D printed by you. This is Trelix, a pot planter with an integrated trellis and dri

Description

This is Trelix, a pot planter with an integrated trellis and drip tray.

A PDF with 3D printing settings is included.

Tags:

Discussions

kriyomstore8 months ago

Hi Elle, this model has some issues where the spiral part came out 3 times and was knocked of the plate even after cleaning and maintaining it , can you help here?

elleSTVDIO8 months ago

Hi! As mentioned in other comments I would suggest to lower the print speed as well as the temperature. I know the spiral part can be tricky to print, please keep me updated.

aa92723755 months ago

can you plz tell lower speed setting i pirnted 4 time but no use

luis.salazar.g1 year ago

i got some trouble printing the Trelix dex pot planter, i'm using an bambu lab a1. at 75%~ it starts to stragger and the tip of the printer Hits the piece.

I try 3 times no succes

elleSTVDIO1 year ago

Hi, try lowering the speed and the extrusion temperature. Please inform me if it works this time.

satiryusuf5021 year ago

When it came to the spiral part, it came out of its place and the printing was interrupted. I couldn't understand whether it was the speed setting or the temperature setting. I used pla+ filament at 190 degrees. I started the speed at low.