A set of 2 ornate floral Hueforge bookmarks. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.67x200mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 1.7mm and the Actual Depth is 1.8mm

Filaments Used: PLA Kingroon Black Transmission Distance: 0.4 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Tough Lavender Blue Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Dark Blue At layer #9 (0.8mm) swap to Lavender Blue At layer #12 (1.04mm) swap to Jade White for the rest.