Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Beige Transmission Distance: 8 This print uses 4 unique filaments

Swap Instructions: Start with Charcoal At layer #4 (0.4mm) swap to Blue Gray At layer #8 (0.72mm) swap to Jade White At layer #9 (0.8mm) swap to Beige At layer #18 (1.52mm) swap to Jade White for the rest.

Please purchase a membership if you're considering selling these commercially.