diy brad29 followers

Gridfinity Magnet Glue Up Jig

1.3K downloads · 4 years ago · Not my deisgn, just uploading the excellent [design by Printables user Jools](https://www.printables

Description

Not my deisgn, just uploading the excellent design by Printables user Jools. Thanks Jools!

"jig for gluing the tiny magnets to gridfinity organizers, so that you can easily get the magnets in the right place with the right orientation, without getting superglue on your fingers.

For the stationary magnets, I used some 8mm magnets leftover from another project. but I have included another version that works with the same 6mm magnets as the rest of the gridfinity system."

https://cad.onshape.com/documents/edb738150160a06758f56078/w/22c68c73a8e6251236c08633/e/1562c50cd8567b28e2c163b1?renderMode=0&uiState=626edc8db9f66d50c0a2accf

Discussions

john301917564 years ago

Having just gotten done gluing 20 trays and bins... I wish I had seen this sooner. Printing one for my next batch.

diy brad4 years ago

I assembled a bunch last night and it really helps a lot! Especially getting the polarity right.

Only other tip I have is for the weighted baseplates to put the weights in first, prevents the magnets from jumping around while you put them in before the glue sets.