For those of you on the discord or those of you who follow my social media accounts, you would be aware that I've been experimenting with these 'wood' like prints. I call them WoodForge, but that's just me.

I learned how to make the 'wood burn' effect in Affinity, and then traced the ACOTAR symbols into SVG so that I could manipulate it in the software and add the various wood burning effects to the line art. And then I hueforged it.

They turned out so well (these photos really don't do them any justice). I've attached a 3MF file for all five symbols, and they all have the exact same layer swaps to maintain a cohesive wood-like effect.

I don't usually attach my .hfp files, but I this time I have included the individual .hfp files for those of you who do have the HueForge software. This is so you can blend your own 'wood' effect - since you can do it so many, many ways. I chose to use a more pale, beigey wood but with the .hfp you can experiment with darker/more oaky wood blends if you like!

I also shrank the X and Y dimensions to about 100mm x 100mm to turn them into coasters (image of the smaller prints attached)! I bought some self-adhesive cork material from AliExpress and stuck them under the print and now I have my very own set of bookish coasters - feel free to do that too, except remember not to adjust the Z height!

So TL;DR:

• I've attached the 3MF file for all symbols, including all layer swaps
• The describe.txt file can be used for all 5 symbol prints
• I've included individual folders of each symbol that contains the .hfp files
• Feel free to resize them into magnets or coasters or what not 🙂 Just don't adjust the Z height!