Obsessed with Vi's back tattoo, honestly. Easy HueForge print if you use the 3MF file, or follow the instructions below. If you wish to resize this, please only resize the X and Y dimensions and NOT the Z.

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm The Model is 161.25x240mm in size

You may print at higher layer heights below the Base Thickness of 0.6mm. The Max allowed Thickness is 2.2mm and the Actual Thickness is 2.2mm

Filaments Used:

• PLA BambuLab Matte Charcoal Transmission Distance: 0.6
• PLA Chrominal Shadow Grey Transmission Distance: 3
• PLA Chrominal Chestnut Brown Transmission Distance: 3.5
• PLA BambuLab Basic Red Transmission Distance: 5
• PLA Siddament Yellow Transmission Distance: 5.5
• PLA Kingroon White Transmission Distance: 5.8 This print uses 6 unique filaments

Swap Instructions:

• Start with Charcoal
• At layer #15 (0.76mm) swap to Shadow Grey
• At layer #18 (0.88mm) swap to Chestnut Brown
• At layer #26 (1.2mm) swap to Red
• At layer #37 (1.64mm) swap to Yellow
• At layer #40 (1.76mm) swap to White for the rest.

Happy Printing!