Are you an adventurer with good knees? Have a hankering for sweetrolls, maybe? Well, you can't leave home without a handy dandy map to take with you on your travels, can you?

This map came out really nicely on the Bambu Lab P1P, using only 4 colours. Please note that I used a 0.2mm CHT nozzle for this to get the details dialled in. You can of course, use a 0.4mm nozzle but I fear you will lose some of the details in the lettering. The layer swaps will remain the same.

This is a LONG print - 12 hours on a Bambu Lab P1P, on a 0.2mm nozzle. Please make sure your bed adhesion is up to the task!

The 3MF already has all settings provided (for a 0.2mm CHT nozzle) for Bambu Studio. it will take a while to slice due to the high details. If you do not want to use these settings, please download the STL file, and follow the print instructions below:

Print Instructions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. I highly recommend using a 0.2mm nozzle for this print.

Filaments Used:

• PLA BambuLab Matte Charcoal Transmission Distance: 0.6
• PLA+ Sunlu Coffee Transmission Distance: 3
• PLA Sunlu Beige Transmission Distance: 8.2
• PLA Kingroon White Transmission Distance: 8

Swap Instructions:

• Start with Charcoal
• At layer #11 (1.04mm) swap to Coffee
• At layer #13 (1.12mm) swap to Beige
• At layer #16 (1.36mm) swap to White for the rest.

If you'd like to support me, you can now subscribe to a Thangs membership plan!

Joining will give you access to a private discord, all paid models, as well as a commercial license to sell the physical prints of my models.

If a Thangs Membership is not your thing, I also have a Patreon that gives you the same perks!