Scarecrow in a Hat
45 downloads · 3 years ago · Can a scarecrow be cute? This one can! I used an orange-yellow hue for this print, but it also looks
This model is restricted by licensing terms.
View license.
Can a scarecrow be cute? This one can! I used an orange-yellow hue for this print, but it also looks good in black, blue-gray hue too!
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm
Filaments Used:
- PLA Kingroon Black Transmission Distance: 0.4
- PLA Overture Orange Transmission Distance: 8.4
- PLA CC3D Lemon Yellow Transmission Distance: 8
- PLA Kingroon White Transmission Distance: 8
Swap Instructions:
- Start with Black
- At layer #14 (0.72mm) swap to Cream
- At layer #23 (1.08mm) swap to Lemon Yellow
- At layer #43 (1.88mm) swap to White for the rest.
This model is restricted by licensing terms.
View license.
Simple Flexi Scarecrow with stand - multicolor
Dress Up Porch Goose for Goose Gear
.png&w=3840&q=75)
Adorable Wizard Mouse 3D Printable Collectible Figure - Fantasy Magic Themed
.png&w=3840&q=75)
Knitted Chubby Penguin Ornament With Santa Hat / No Supports / 3MF Included
Set of 3 Gnomes – Plain & Magnet
Santa Skellington Ornament / Keychain / Earring
Winter Hat Jewelry Box – Cozy Beanie Storage Container
Not so… XL Nutcracker, for smaller build plates
Witch Stitch 3D Model – Halloween Pumpkin Edition | Free Layerables STL Figure
Christmas Stitch 3D Model
Snowdragon 2025
Not So.. XL April showers Goose, for smaller build plates, below 300x300x300
Not So XL Grinch
Not Soo XL Santa
Santa Hat Flexi
XL Nutcracker for larger build plates
Scary Pumpkin and tealight
XL Grinch
XL Santa
