Part of my LoL Sisters themed collection!

The included 3MF has all filament swaps loaded for Bambu Studio users. If you do not use Bambu Studio, please feel free to download the STL and follow the instructions below!

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

Filaments Used:

• PLA Kingroon Black Transmission Distance: 0.4
• PLA Sunlu Purple Transmission Distance: 5
• PLA META Sunlu Teal Transmission Distance: 5.4
• PLA Sunlu Beige Transmission Distance: 8.2
• PLA Kingroon White Transmission Distance: 8

Swap Instructions:

• Start with Black
• At layer #17 (0.84mm) swap to Purple
• At layer #20 (0.96mm) swap to Teal
• At layer #30 (1.36mm) swap to Beige
• At layer #39 (1.72mm) swap to White for the rest.

If you'd like my work and would like to support me, you can now subscribe to a Thangs membership plan!

Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models.

If a Thangs Membership is not your thing, I also have a Patreon that gives you the same perks!