The PC version of this game released this week and I got all up in my feels about it. So here, have a broody Cloud to accompany you on your shenanigans!

As usual, if you use the 3MF file, all the swaps are already loaded in for you. If not, please follow the instructions below:

Print Instructions Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

The Model is 160x240mm in size You may print at higher layer heights below the Min Depth of 0.4mm The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used:

• PLA BambuLab Matte Charcoal Transmission Distance: 0.6
• PLA Chrominal Penumbra Gray Transmission Distance: 7.4
• PLA Chrominal Chestnut Brown Transmission Distance: 3.5
• PLA Siddament Yellow Transmission Distance: 5.5
• PLA Kingroon White Transmission Distance: 5.8
• PLA TECOR Light Blue Transmission Distance: 3.5 This print uses 6 unique filaments

Swap Instructions:

• Start with Charcoal
• At layer #13 (0.68mm) swap to Penumbra Gray
• At layer #16 (0.8mm) swap to Chestnut Brown
• At layer #22 (1.04mm) swap to Yellow
• At layer #30 (1.36mm) swap to White
• At layer #40 (1.76mm) swap to Light Blue for the rest.