Faux blueprint of an alien head for the extra terrestrial fans out there :)

3MF file will have all settings preloaded for Bambu Studio/Bambu printers. If you don't use those, then download the STL file, and use the instructions below:

Print Instructions Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

Filaments Used:

• PLA BambuLab Matte Charcoal Transmission Distance: 0.6
• PLA CC3D Blue Gray Transmission Distance: 3
• PLA Sunlu Beige Transmission Distance: 8.2
• PLA Kingroon White Transmission Distance: 8

Swap Instructions:

• Start with Charcoal
• At layer #18 (0.88mm) swap to Blue Gray
• At layer #23 (1.08mm) swap to Beige
• At layer #32 (1.44mm) swap to White for the rest.

If you'd like to support me, I now have a Patreon!

Joining will give you behind the scenes information on WIPs, access to a private discord, early access AND exclusive models!

If you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my Patreon!