Wander into a whimsical lost world with the Brontosaurus Bouncimals! These gentle giants bring big charm with their long necks, soft curves, and playful bounce. Some shimmer with ancient patterns, while others sparkles from a forgotten forest.

Start your herd and let the prehistoric play begin! 🦕🍃🪄

⭐️Available now with a Thangs Subscription or on Patreon.

🖨️ Print settings:

• 3 walls, 15% gyroid infill or honeycomb3D

• 3 walls provides the best weight to make it the most satisfying but 2 is also just fine.

• I made print speed of 60mm/s for outer walls and top surfaces in the 3mf.

• .16mm or .2mm layer height along with slowing down helps to make them buttery smooth.

• Objects are colored by parts so when changing colors be sure to do so by changing the preset in Bambu Studio from the side menu.

• Check Z-seam to ensured desired results when filling the plate.

🔎Scaling:

• Ideal size for matching with other bouncimal releases is to print at 100%.

• Will work scaled down - but do a test print first to make sure you like it and there is proper function of the legs.