%252008.33.38_c9a51254.jpg&w=3840&q=85)
%252008.33.38_c9a51254.jpg&w=256&q=75)
%252008.41.19_f2bd6ec4.jpg&w=256&q=75)
Multiboard - Bolt-locked Paper Towel Holder
1.8K downloads · 2 years ago · This two-part holder uses bolt-locked connectors for attaching to Multiboard tiles. I recommend usin
This two-part holder uses bolt-locked connectors for attaching to Multiboard tiles. I recommend using a Heavy Weight Bearing Hook Snap on the top connector.
It prints without supports in the provided positions.
V2: Added a small recess at the bottom of the holes to make it easier to screw in the bolts.
License: https://www.multiboard.io/license
Multiboard - Bolt-locked Paper Towel Holder
1.8K downloads · 2 years ago in and
Modular Toilet and Towel Paper Holder – 3D Printable Versatile Design
PAPER TOWELL HOLDER (KIMO) - TWO SIZES / TISSUE ROLL HOLDER / MODERN HOME DECOR
PAPER TOWELL HOLDER (KASO) - TWO SIZES / TISSUE ROLL HOLDER / MODERN HOME DECOR
MANDO | paper towel roll holder
Raven Paper Towel Holder – Bold Wall-Mounted Kitchen or Bathroom Decor Inspired by Gothic and Nature
Skeleton Hand Towel Holder
Dinosaur Toilet Paper Holder – T-Rex Bathroom Decor
Rolling paper holder normal & King Size
Paper Form Holder and Display
Salt & Pepper Mill Holder
Towel Rack For Peloton Bike
Root Roll
KITCHEN ROLL DISPENSER (KAMI) - TWO SIZES / TISSUE ROLL HOLDER / MODERN HOME DECOR
Cold Storage (Cards, Watch display, Generic storage)
PipaShip | Nuts holder
Ornate Rococo Desk Organizer - Coquette Stationery Caddy
Ice Cream Pint Holder Expansion Pack 1 - Commercial Version
Fairy Desk Organizer with Tealight Bowl – Enchanted Forest Stationery Holder
Mermaid Shell Bathroom Organizer Planter Bowl | Coastal Decor Storage Holder | 3D Printable Vanity C
Good print! It needs to be updated to work with today's flush snaps and bolt locks.
Took me a while to figure out the correct hardware to mount these. You're right, you have to use the older "raised" snaps. For the upper posts I used bolt locking snaps, and for the lower posts I used just regular snaps.
2x Raised Moderate Weight Bearing Snaps: https://than.gs/m/989145 2x Bolts: https://than.gs/m/1123334 2x Raised Snaps: https://than.gs/m/974295
So, here we are in 2026 (march) and i just printed this. All went together with the files in the standard download. Was a bit nervous about bending the arms to fit the roll in but no issues...
What Bolts do I use to fix the snaps? I printed it but cant find the bolts, the small bolts are too big for this,
I am having the same problem. I have tried two different thread bolts and neither work.
you can use this one https://than.gs/m/1065870
Cheers for the model! FYI I've found that the bolt locked push-fits work better if you put a small hole on the other side for the point of the multipoint bolts to go into. Otherwise I sometimes can't get the threaded multipoint to snug in there tightly enough.
You are just right! I've just added a small recess at the bottom of the holes, and it became much easier to screw in the bolts. It seems like the original holes are too shallow