Give heavy vines clean, reliable support that looks good in your space. Pillaris Core is a 3D‑printable, modular trellis system built around stackable 110 mm fluted pillars and a three‑part interlocking joint. Add height as your tomatoes or cucumbers climb—no rework mid‑season.

Designed by Vireo Studio, Pillaris Core blends architectural lines with real load‑bearing performance. The fluted texture masks layer lines and adds gentle grip for tendrils, while the reinforced 11 mm profile and lateral bracing keep sway to a minimum.

Key Features

• Modular and scalable: 110 mm pillars stack with a blind‑joint for clean, continuous columns
• Heavy‑vine ready: reinforced 11 mm profile for torsional rigidity on tomatoes, cukes, and climbers
• Support‑free printing: geometry tuned for clean bridges and overhangs—no supports needed
• Stable footprint: 60 mm lateral braces lock a square frame; corner hub has wide vine clearance
• Clean aesthetic: fluted column look turns a utility into a sculptural garden detail
• Outdoor‑friendly: optimized for PETG/ASA; matte PLA works for indoor/greenhouse use

Included STL Files

• Pillaris V‑110: 110 mm vertical pillar with blind‑joint stacking
• Pillaris H‑60: 60 mm lateral brace for square framing
• Pillaris Hub: reinforced corner/transition adapter with wide‑clearance center

Recommended Print Settings

• Nozzle: 0.4 mm
• Layer height: 0.20 mm (0.28 mm draft acceptable)
• Walls: 4 perimeters for stiffness
• Top/Bottom: 4–5 layers
• Infill: 20–30% gyroid or cubic
• Material: PETG or ASA for UV/weather; PLA+ for indoor
• Supports: none
• Adhesion: 3–5 mm brim suggested for tall parts
• Orientation: print pillars upright; print braces and hub as oriented in files

Use

• Stack pillars as your plant grows; add H‑60 braces to square and stiffen the frame; use the Hub for corners and transitions.

Vireo Studio — Custom designs to elevate your space.