• Annoying Easter Basket that features 48 bolts you have to remove to get inside!
• Uses the same bolts as other annoying boxes (5 different varieties available plus multi-tool)
• Support-free. No adhesive or external hardware needed for assembly (100% 3d printed).
• Build volume needed - 252 mm x 172 mm x 122 mm
• Basket Inner Dimensions - 232 mm x 152 mm x 110 mm

Printing Info These are just the settings I used to test the model, which are MOSTLY just stock slicer settings in Bambu Studio. Feel free to use whatever settings work best for you.

• FDM or Resin: FDM
• Scaling: Can be scaled up. Scaling down may cause issues with the threaded parts.
• Supports: None
• Infill/Perimeters: 10-15% infill + 2 wall loops
• Nozzle Size: 0.4
• Layer Height: 0.2
• Print Time: Approx 22 hours (Bambu P1S)
• Filament Usage: Approx 670 grams (Bambu P1S)

Printing Notes

1. No Supports Needed. Print all pieces in the orientation they print in and thread together afterwards.
2. You need 48 bolts total. I have included 5 different types of bolts with corresponding tools. You can print all 48 in one type of bolt or any combination you would like.
3. The thread clearance on the model is 0.30. As long as your printer can handle that clearance (which is should), everything should fit together well.
4. If you wish for things to be tighter or looser, trying adjusting XY Contour Compensation (setting in BambuSlicer, may be called something differeint in other slicers) to -0.10 (to make looser) or +0.10 (to make tighter).

File List (15)

1. annoying_easter_basket
2. handles (2 ea)
3. handle_bolts (4 ea)
4. lids (2 ea)
5. all_in_one_tool
6. flathead bolt
7. flathead screwdriver
8. philips bolt
9. philips screwdriver
10. 5.5 mm bolt
11. 5.5 mm screwdriver
12. 6 mm bolt
13. 6 mm screwdriver
14. special bolt
15. special screwdriver